Arma Reforger Cheat Requirements: What Your PC Needs Before You Buy

• Windows 10 or 11
• Intel or AMD processor
• HVCI on
• Core Isolation on
• TPM on
• Secure Boot on
• Cloud DMA, which the page says is required for full functionality

You also get loader access after purchase, and you need a stable internet connection.

HVCI is the setting Windows calls Memory Integrity. It sits under Core Isolation.

1. Open Windows Security.
2. Go to Device Security.
3. Under Core isolation, open Core isolation details.
4. Turn Memory integrity on, then restart if Windows asks.

If Memory integrity will not turn on, Windows usually tells you which driver is blocking it.

1. Press the Windows key and R, type tpm.msc and press Enter.
2. Check that the status says the TPM is ready for use.

If you see a message that no compatible TPM is found, it may be disabled in your BIOS or UEFI settings.

1. Press the Windows key and R, type msinfo32 and press Enter.
2. Look at the BIOS Mode and Secure Boot State lines.
3. BIOS Mode should say UEFI, and Secure Boot State should say On.

If Secure Boot is off, you can usually turn it on in your BIOS or UEFI settings. The exact menu name varies by motherboard.

The product page says Cloud DMA is required for full functionality. For a cheat-focused walkthrough, read our Cloud DMA setup guide. You can also use the Support page or open a support ticket if hardware details are unclear.

• Changing BIOS settings can affect other software on your PC, so write down what you change.
• Some settings need a full restart to take effect.
• Settings and requirements can change as the product is updated, so always treat the live product page as the final source.

If you are stuck, the Arma Reforger product page links to support options, and our troubleshooting guide covers what to check first when something does not work.